High temperature resistant high-quality green environmental protection crosslinked PE solar photovoltaic cable
Description
Photovoltaic cables suitable for mobile and fixed installation; Suitable for connection between photovoltaic panels, and photovoltaic panels to the AC inverter; Suitable for indoor and outdoor use.
The materials used in the construction of these cables exceed the thermal endurance test specified in the standard EN 60216 for +120 ºC (temperature index). Compliance with this test provides that, with proper installation, operation and maintenance, the estimated life of the cable is 30 years at 90 °C.
Technical Data
Size | Cross Section | Conductor Structure | Outer Diameter | Max. DC | Rated | Rated |
Resistance at 20℃ | Voltage | Current | ||||
mm² | mm | mm | Ω/km | V DC | A | |
1 x 2.5mm² | 2.5mm² | 49 x ∅0.285 | 5.2 | 8.06 | 1000/1500 | 30A |
1 x 4.0mm² | 4.0mm² | 56 x ∅0.285 | 5.9 | 4.97 | 1000/1500 | 50A |
1 x 6.0mm² | 6.0mm² | 84 x ∅0.285 | 6.5 | 3.52 | 1000/1500 | 70A |
1 x 10.0mm² | 10.0mm² | 80 x ∅0.40 | 8.5 | 2.12 | 1000/1500 | 95A |
Application :
Applied to solar panels for power generation and related components of the wiring, connection, particularly suitable for outdoor. Resistance to sunlight, anti-aging, Using the low smoke halogen-free flame retardant materials, higher grade, more safety.
Name | PV Cable |
The product description | Widely used in indoor and outdoor solar installations, electrical installation, indoor and outdoor, explosion-prone areas, factories, industrial and agricultural industries. |
Product features | Low smoke without halogen, good cold, ultraviolet, ozone - resistant and weather - resistant. |
Flame retardant, cutting resistance and penetration resistance. | |
Cable protection level Ⅱ level. | |
With 150 ℃ photovoltaic cable radiation as insulation materials, halogen free flame retardant is halogen-free, non-toxic modified polyethylene thin hengjing resin as the main raw material, add halogen-free, non-toxic, flame retardant, heat stabilizer, eliminate smoke agent, preservative, such as fertilizer, does not contain halogen, heavy metals, phosphorus. | |
It conforms to ROHS, and the insulation resistance is small after immersion. | |
Electrical | 1. The dc resistance: the finished cable at 20 ℃ conductive wire core dc resistance is not greater than 5.09 Ω/km |
2. The insulation resistance: the finished insulation resistance of cable at 20 ℃ should not less than 1014 Ω. Cm, finished cable insulation resistance at 90 ℃ is not less than 1011 Ω. Cm | |
3. The sheath surface resistance: resistance of the finished cable sheath surface should be not less than 109 Ω. | |
Cable structure | Conductor: tinned copper wire 2.5, 4, 6, 10, 16 mm ^ 2 PV1 - F |
18, 16 and 14, 12, 10, 8, 6, 4, 2 mm ^ 2 PV wire | |
Insulation: > 0.5mm thick with low smoke and halogen material, and meet the specified limit of the customer. | |
Sheath: low smoke and halogen free material thickness > 0.5mm. | |
Detailed parameters | Ambient temperature: - 40 ℃ ~ + 90 ℃ |
The highest temperature of conductor: 120 ℃ (allow 5 s in short circuit temperature 200 ℃) | |
Limited voltage: AC0.6/1kv dc1.8kv. |
|
Company introduction
We are a wire factory located in Zhejiang Haiyan, China.
We have professional, high quality machines and testing equipment. Main business Low voltage power cables, civil wires, audio cables, fire alarm cables,Control cable and other more than 30 series of products. The company's service purpose is Integrity-based, customer satisfaction for the principle. We hope that in the near future To work with you.
Contact Us at Any Time